Faculty

Book Publication

Books

Basic Workshop Practice, ARS Publications, Tamilnadu, India, 2006.

Basic Mechanical Engineering, ARS Publications, Tamilnadu, India. 2004,

K.Tamilarasan, A. Ponshanmugakumar, Computer Integrated Manufacturing, Sam Publication, Tamilnadu, India 2018. ISBN : 9789387746064

Book Chapters Published

  • Babu, N.B.K., Vignesh, V., Nagaprasad, N., Palanikumar, K., Pugazhenthi, A. (2022). Studies on Mechanical Characterisation of Bio-Fibre Reinforced Polymer Composites. In: Palanikumar, K., Thiagarajan, R., Latha, B. (eds) Bio-Fiber Reinforced Composite Materials. Composites Science and Technology. Springer, Singapore. https://doi.org/10.1007/978-981-16-8899-7_8
  • Palanikumar, K., Rajmohan, T., Latha, B. (2022). Bio-fibre Reinforced Composites: Mechanical, Thermal and Tribological Properties and Industrial Applications—An Introduction. In: Palanikumar, K., Thiagarajan, R., Latha, B. (eds) Bio-Fiber Reinforced Composite Materials. Composites Science and Technology. Springer, Singapore. https://doi.org/10.1007/978-981-16-8899-7_1
  • Murali, B., Ramnath, B.V., Palanikumar, K. (2022). Evaluation of Mechanical Properties of Woven Hybrid Reinforced Composites Fabricated by Vacuum Assisted Compression Molding Technique. In: Palanikumar, K., Thiagarajan, R., Latha, B. (eds) Bio-Fiber Reinforced Composite Materials. Composites Science and Technology. Springer, Singapore. https://doi.org/10.1007/978-981-16-8899-7_13
  • Vijayakumar, S., Palanikumar, K., Natarajan, E. (2022). Mechanical and Resonance Properties of Sustainable Polymer Composite Reinforced with Unidirectional Bio Palm Fiber. In: Palanikumar, K., Thiagarajan, R., Latha, B. (eds) Bio-Fiber Reinforced Composite Materials. Composites Science and Technology. Springer, Singapore. https://doi.org/10.1007/978-981-16-8899-7_12
  • Sailesh, A., Palanikumar, K., Mani, N., Ponshanmugakumar, A. (2022). A Review on the Sustainability Prospects of Bio Fibre Reinforced Composite Materials. In: Palanikumar, K., Thiagarajan, R., Latha, B. (eds) Bio-Fiber Reinforced Composite Materials. Composites Science and Technology. Springer, Singapore. https://doi.org/10.1007/978-981-16-8899-7_20
  • Tamilarasan, A., Rajmohan, T., Rajamani, D., Palanikumar, K. (2022). Optimization of Process Parameters in AWJ Cutting of Pineapple Fiber Reinforced Polymer Composites: Hybrid SCCSA Algorithm. In: Palanikumar, K., Thiagarajan, R., Latha, B. (eds) Bio-Fiber Reinforced Composite Materials. Composites Science and Technology. Springer, Singapore. https://doi.org/10.1007/978-981-16-8899-7_7
  • T.N. Valarmathi, S. Ravichandran, S. Robin, V. Revanth, R. Siva, S. Sekar & K. Palanikumar (2022). Analysis of Mechanical Properties of Jute Fiber Reinforced with Epoxy/Styrene-Ethylene-Butylene-Styrene/Al Composites. In: Palanikumar, K., Thiagarajan, R., Latha, B. (eds) Bio-Fiber Reinforced Composite Materials. Composites Science and Technology. Springer, Singapore. https://doi.org/10.1007/978-981-16-8899-7_11
  • Rajmohan, T., Vijayan, D., Mohan, K., Vijayabhaskar, S., Palanikumar, K. (2022). Dynamic Mechanical Analysis (DMA) of Natural Fibre Reinforced Polymer Matrix Composites (NFRPMC)-Review. In: Palanikumar, K., Thiagarajan, R., Latha, B. (eds) Bio-Fiber Reinforced Composite Materials. Composites Science and Technology. Springer, Singapore. https://doi.org/10.1007/978-981-16-8899-7_17
  • Boppana, S.B., Palani Kumar, K., Ponshanmugakumar, A., Dayanand, S. (2022). Different Natural Fiber Reinforced Composites and Its Potential Industrial and Domestic Applications: A Review. In: Palanikumar, K., Thiagarajan, R., Latha, B. (eds) Bio-Fiber Reinforced Composite Materials. Composites Science and Technology. Springer, Singapore. https://doi.org/10.1007/978-981-16-8899-7_4
  • Palani Kumar, K., Shadrach Jeya Sekaran, A., Ramya, K. (2022). Investigation on Wear Performance of Sisal Fiber Reinforced Epoxy Composites: Experimental and Statistical Study. In: Palanikumar, K., Thiagarajan, R., Latha, B. (eds) Bio-Fiber Reinforced Composite Materials. Composites Science and Technology. Springer, Singapore. https://doi.org/10.1007/978-981-16-8899-7_18
  • Palanikumar Kayaroganam, Response Surface Methodology in Engineering Science, Open access peer-reviewed Edited Volume, November 10th 2021, IntechOpen.
  • Kayaroganam Palanikumar, Introductory Chapter: Response Surface Methodology in Engineering Science, Open access peer-reviewed Edited Volume, November 10th 2021, IntechOpen.
  • Valarmathi T.N., Palanikumar K., Sekar S., Latha B. (2021) ANFIS and RSM Modelling Analysis on Surface Roughness of PB Composites in Drilling with HSS Drills. In: Palanikumar K., Natarajan E., Sengottuvelu R., Davim J.P. (eds) Futuristic Trends in Intelligent Manufacturing. Materials Forming, Machining and Tribology. Springer, Cham.
  • Natarajan E., Palanikumar K., Ramesh S. (2021) Smart Manufacturing—A Lead Way to Sustainable Manufacturing. In: Palanikumar K., Natarajan E., Sengottuvelu R., Davim J.P. (eds) Futuristic Trends in Intelligent Manufacturing. Materials Forming, Machining and Tribology. Springer, Cham.
  • Sailesh, Ashwin; Palanikumar, K; ,Mechanical Properties of Flax-Cotton Fiber Reinforced Polymer Composites,Green Composites,393-411, 2021
  • NRR Anbusagar, K. PalaniKumar, A Ponshanmugakumar, Preparation and properties of nanopolymer advanced composites: A review, Polymer-based Nanocomposites for Energy and Environmental Applications, 27-73.
  • K.Palanikumar Glass Fiber Reinforced Composite materials: Book Chapter in “ Composites in Helicopter industry” to be Published by Wood head Publications, UK –In Press.
  • N.R. R. Anbu Sagar, K. Palanikumar: Development and Characterization of Nano Clay Reinforced Three-Phase Sandwich Composite Laminates. Nanoclay Reinforced Polymer Composites, 01/2016: pages 357-391;  ISBN: 978-981-10-1952-4, DOI:10.1007/978-981-10-1953-1_16
  • K. Palanikumar, T. Srinivasan, K. Rajagopal, J.P. Davim, Machinability of Fibre-Reinforced Plastics. Machinability of Fibre-Reinforced Plastics, 2015 edited by J. Paulo Davim, 06/2015: chapter Drilling of high impact Polystrene Materials: pages 163-176; Walter de Gruyter GmbH & Co KG.
  • Kayaroganam Palanikumar: Application of response surface method and desirability function for the optimization of machining parameters of hybrid metal matrix (Al/SiC/Al2O3) composites. Metal Matrix Composites, 2014 edited by Davim, J. Paulo, 06/2014: chapter 8: pages 179-200; Walter de Gruyter GmbH & Co KG., ISBN: 9783110315448, DOI:10.1515/9783110315448.179
  • K.Palanikumar, B.Latha, V.S.Senthilkumar J.PauloDavim Application of artificial neural network for the prediction of surface roughness in drilling GFRP composites, Materials Science Forum, Trans Tech publications, Switzerland DOI: 10.4028/www.scientific.net/MSF.766.21.
  • K. Palanikumar, J. Paulo Davim: Electrical discharge machining: Study on machining characteristics of WC/Co composites. Machining and Machine-Tools, 2013 edited by J. Paulo Davim, 05/2013: chapter Electrical discharge machining: study on machining characteristics of WC/Co composites: pages 135-168; Wood Head., DOI:10.1533/9780857092199.135
  • K.Palanikumar, B.Latha, J.PauloDavim,  Application of Taguchi method with Grey fuzzy logic for the optimization of machining parameters in machining composites, Computational Methods for Optimizing Manufacturing Technology: 2012, Models and Techniques. IGI-GLOBAl Publishers, USA. DOI: 10.4018/978-1-4666-0128-4.ch009.
  • Kayaroganam Palanikumar: Analyzing surface quality in machined composites. Machining Technology for Composite Materials, Edited by H. Hocheng, 05/2012: chapter Analyzing surface quality in machined composites: pages 154-182; Wood Head., DOI:10.1533/9780857095145.1.154
  • Rajmohan, K. Palanikumar, G. Harish: Surface Roughness Evaluation in Drilling Hybrid Metal Matrix Composites. Emerging Trends in Science, Engineering and Technology, 01/2012: pages 325-332; , DOI:10.1007/978-81-322-1007-8_29
  • K.Palanikumar, S. Prakash, J. Paulo Davim: Investigation of optimum parameters for multiple performance characteristics in drilling wood composites (MDF) using Grey-Taguchi method. Wood and Wood Products,, 1 edited by Davim, J.P, 01/2012: chapter Chapter 4: pages 87-108; NOVA., ISBN: 978-1-62081-973-9
  • K.Palanikumar,T.Rajmohan,J.Paulo Davim,”Optimization of machining parameters for multiple performances in drilling hybrid composites using desirability-based approach”,Chapter 8 (in press), in Davim, J.P (Ed.), Metal Matrix Composites, NOVA Publishers, New York, 2011, ISBN: 978-1-61209-771-8.
  • K.Palanikumar, T.Rajasekaran, J. Paulo Davim, “Modelling and analysis on wear behaviour of metal matrix composites”, Chapter 7, (157-174) in Davim, J.P. (Ed.), Tribology of Composite Materials, NOVA Publishers, New York, 2010 ISBN: 978-1-61668-319-1
  • K.Palanikumar,J. Paulo Davim, “Application of fuzzy logic in manufacturing: a study on modelling of cutting force in turning GRFP composites”, Chapter 7, (111-128) in Davim, J.P. (Ed.), Artificial Intelligence in Manufacturing: Research, NOVA Publishers, New York, 2010 ISBN: 978-1-60876-214-9
  • Kayaroganam Palanikumar, S. Prakash, C.V.Jayakumar, J. Paulo Davim: “Analysis of delamination in drilling wood composite medium density fibre boards. Drilling of Composite Materials, 2009 edited by J. Paulo Davim, 09/2009: chapter 7: pages 121-136; Nova., ISBN: 978-1-60741-163-5.